|
DEPARTMENT OF MECHANICAL ENGINEEERING
|
|||
|
From the Desk of the Head
|
|||
| Mechanical Engineering is one
of the oldest and core discipline in Enginering field. In fact, Mechanical
Engineers are inherently multi-disciplinary as the design of a car engine
combines the fields of thermodynamics,heat transfer, fluid dynamics,materials
science, mechnical design,electronics controls, dynamics and vibrations
, and chemistry. Althouth the Meachinal Engineers may specialize in any one of these fields, a cursory knowledge of each of these fields is necessary to interact with other engineers. The department has intake of 90+30* students. A competent and profssional team of 23 full time faculty, mostly having Ph.D. and M.Tech qualifications from reputed universities, is backing up the steady growth and development of this department. The dedicated faculty has created an active teaching-learning interface. The Internet facility has been provided to the offices of all faculty and technical supporting staff, as well as to all laboratories of the deptt. Other acitivities of the deptt includes Reasearch, Consultancy, Counseling,Carreer Guidance and Co-Curricular activities. Field Trips and Educational Tours are compulsary part of the curriculum where they visit private and public sector undertakings to have a feel of the latest technology. |
 |
||
| The deptt has 16 laboratories fully equiped with latest equipment and has 12 technical supporting staff to provide strong and active support in the smooth functioning of the different laboratories. The laboratories are equipped to carry out research in all areas related to Mechancial and Production & Industrial Engg | |||
|
Dr. N.K. Grover
|
|||
| Research Areas | |||
| · CAD | · Mechanical Design | ||
| · Automation | · CAPP | ||
| · Non Traditional Machining-Ultrasonic
Drilling & EDM |
· Tribology | ||
| · CAM, Robotics | · Computational Mechanics | ||
| · Technology Mechanics | · Ergonomics | ||
| · Technology Management | · FEM | ||
| · Composite Materials | · Resource Management | ||
| · CFD | · Heat transfer & Energy Conservation | ||
|
PG Program
|
UG Program
|
||
|
Ph.D. Mechanical Engineering
|
· B.Tech. Mechanical Engineering
|
||
|
M.Tech. Mechanical Engineering
|
|||
| Faculty | |||
| Sno. | Name | Designation | Qualification |
|
1
|
Dr. T.S. Sidhu | Professor | PhD. IIT Roorkee M.E. (Prod. Engg.), PU, Chandigarh B.E. (Prod. Engg.), PU, Chandigarh MBA, Pbi Univ. Patiala |
|
2
|
Dr. Neel Kanth Grover | Associate Professor & HOD | Ph.D., IIT Delhi M.E. (Mech.) PU Chandigarh B.E. (Mech.) Pbi. Univ. Patiala MBA (IGNOU) |
|
3
|
Dr. Manoj k. Kushwaha | Associate Professor | PhD. IIT, Roorkee M.Tech. (Engg. Materials)Barkatullah Univ., Bhopal B.E.(Mech. Engg.) Rani Durgawati Univ., Jabalpur |
| 4 | Dr. Arun Asati | Associate Professor | M.E. (Heat Power) R.D.Univ.Jabalpur B.E. (Mech Engg.) R.D.Univ.Jabalpur |
| 5 | Dr. Rajbir Singh Bhatti | Associate Professor | Ph.D., IIT, Roorkee ME, NIT, Jalandhar B.Tech (Indl.), TIET Patiala |
| 6 | Dr. Rakesh Kumar | Associate Professor | Ph.D., IIT Roorkee M.E. (Mech.) PU Chandigarh B.E.(Hons) Mech. Engg. Anamalai University |
| 7 | Dr. Tejeet Singh | Associate Prof | Ph.D. M.Tech (Indl.) PTU Jalandhar B.E. (Indl.) TIET Patiala |
|
8
|
Mr.
Nripjit ( on deputation to BCET, Gurdaspur ) |
Asstt. Prof | M.E. (Prod. Engg.) PU Chandigarh B.E. (Hons) Prod. Engg. PU Chandigarh |
|
9
|
Mr. Sukhwant Singh | Asstt. Prof | B.E. (Prod.) PU Chandigarh |
|
10
|
Mr. Jatinder Kumar Aggarwal | Asstt. Prof | M.E. (Prod. Engg.) B.E. (Prod.) PU Chandigarh |
|
11
|
Mrs. Vaishali Goyal | Asstt. Prof | B.E. (Prod.), PU Chandigarh |
|
12
|
Mr. Ravinder Pal Singh | Asstt. Prof | B.Tech (Mech.), GNDU Amritsar |
|
13
|
Mr. Munish Kumar | Asstt. Prof | B.Tech. (Hons.) Prod. Engg. |
|
14
|
Mr. Vinod Kumar [ on EOL] | Asstt. Prof | M.E.(Indl.)TIET Patiala B.E.(Mech. Engg.),TIET Patiala |
|
15
|
Mr. Vivek Sood | Asstt. Prof | B.Tech. (Indl.) , GNDU Amritsar |
|
16
|
Mr. Sandeep K. Kazal | Asstt. Prof | B.Tech. (Indl.) , GNDU Amritsar MBA, MCA |
|
17
|
Mr. Manjinder Singh | Asstt. Prof | M.Tech PTU Jalandhar B.Tech (Indl.) GNDU Amritsar |
|
18
|
Mr. Gazal Preet Arneja | Asstt. Prof | M.Tech (Indl.) PTU Jalandhar B.Tech (Indl.), GNDU Amritsar MBA (Operations Management), IGNOU New Delhi |
|
19
|
Mr. Chanchal Kumar [ on EOL] | Asstt. Prof | B.E. (Ceramic & Cement Tech.)Gulbarga Univ. |
|
20
|
Mr. Dharmpal | Asstt. Prof | M.Tech. (Prod.) PTU, Jalandhar B.Tech. (Prod.) PTU, Jalandhar |
|
21
|
Mr. Jwala Parsad | Asstt. Prof |
M.Tech. (Mech.) PTU, Jalandhar
|
|
22
|
Mr. Sukhjinder Singh | Asstt. Prof |
M.Tech. (Mech.) PTU, Jalandhar
|
|
23
|
Mr. Gurnam Singh | Asstt. Prof |
M.Tech. (Mech.) PTU, Jalandhar
|
|
24
|
Mr. Fateh Singh | Asstt. Prof |
M.Tech. (Mech.) PTU, Jalandhar
|
| Infrastructure & Facilities | |||
| (a) List of laboratories | |||
| · CAD | · Metrology | ||
| · Refrigeration & Air Conditioning | · Heat Transfer | ||
| · CAM | · Machine Tools | ||
| · Fluid Machinery | · Measurement and Control | ||
| · Solid Mechanics | · I C Engines | ||
| · Industrial Engineering | · Non Traditional Machines | ||
| · Dynamics of Machines | · Workshop | ||
| (b) Major Equipments | |||
| CAD Lab.: H/W: P-IV (27 No.) S/W: Auto CAD 2000m + Inventor Serves 6.0 |
 |
||
| CAM Lab.: H/W:
|
FMS (Flexible Manufacturing System) |
||
| ECONO CNC Production Lathe, VMC-200T HMT CNC milling machine, RHINO XR-2 Education Robot | |||
| S/W: | |||
| VR-CIM- (CIMS Simulation training software) | |||
| Hydrasim- (Hyd. Ckt. design s/w) | |||
| Non Traditinal Machining Lab | |||
| EDM, Ultrasonic Drilling, Plasma are welding, Laser cutting. | |||
| I C Engine Lab | |||
| Eddy current Dynamometer, Engine
Test Beds, 4S Diesel & Petrol Engines 6, & 4 cylinders, 12 cyl. Rotary Engine |
|||
| Fluid Machinery Lab | |||
| Kaplan & Francis Turbines,
Pelton wheel, Hydraulic Ram, Rotary pump |
|||
| Solid Mechanics Lab | |||
| UTM, Torsion testing, Leaf Spring Tester, hardness testing m/c's. | |||
| Steam Engineering Lab | |||
| Non IBR Boiler, HVAC equipments, Steam Turbines and Engines. | |||
| Main Course Modules | |||
| In UG Program | |||
|
· Basic Sciences |
· Technical Arts | ||
| · Mechanical Design and Drafting | · Thermal Engineering | ||
| · Industrial & Production | · CAD/CAM & Robotics | ||
| · Practice oriented courses |
· Industrial Project Semester | ||
| Specific Strengths | |||
| · Emphasis on applied knowledge, and practicals through Projects, Case Studies, and laboratory. | |||
| · Teaching of CAD tools, programming and use of CNC machines and Industrial Robots. | |||
| · Availability of experienced staff and faculty for teaching and research. | |||